Miami's #1 Source for Pro Audio & DJ Equipment: 1-866-279-4489 / 305-420-5634

PreSonus Sceptre S6 Two-Way CoActual Studio Monitor with DSP Temporal Equalization (Each) (Used Unit)

Item #: 673454002274-1

1 review(s)
Add to Wishlist

Product Highlights

  • 6.5″ Woofer and 1″ Horn-Loaded Tweeter
  • Coaxial Transducer with Coherence Align
  • 200W RMS with Class D Amplification
  • 102 dB Max SPL
  • 32-bit/96kHz Active Floating-Point DSP
  • Temporal Equalization with FIR Filters
  • Accepts XLR, 1/4″ TRS and RCA Inputs
  • “Soft Start” Amplifiers
  • Output Current and Overheat Protection
  • Internal Power Supply

1359003427000_910718.jpg

IN STOCK & READY TO SHIP

Sale Price:
USD 789.99
+ Plus Free Shipping

In stock

-Financing Available Here-
FINANCING AVAILABLE / CLICK HERE
 
FINANCING AVAILABLE / CLICK HERE
 
+ Add to Wish List
More Financing
  • Regular Price
    $789.99
  • Instant Savings
    $0

DEALS?

Don't see the deal you need

Request a Deal

We Price Match any price from an Authrized Dealer.

You will receive a quick response from our crew.

Or just call us now

(866) 279-4489

CAPTCHA
Please wait...

QUESTIONS?

Connect with an expert instantly.

Call us: 866-279-4489


Free Shipping

Easy Returns
People Who Viewed This Item Also Viewed
Overview

The Sceptre S6 Two-Way CoActual Studio Monitor with DSP Temporal Equalization by PreSonusarticulates nuances of your music that can’t be reproduced by conventional designs. The Sceptre S6 features a panoramic soundstage and a wide dynamic range. The advanced coaxial design works integrally with a 32-bit/96 kHz, dual-core processor running Fulcrum Acoustic’s TQ Temporal Equalization Technology.

The Sceptre S6 features a 6.5″ low/mid-frequency driver, a 1″ horn-loaded tweeter and front-firing acoustic ports. The systems are biamplified, with each transducer powered by an independent 100W RMS, Class D power amplifier with an internal heat sink. Sceptre has an internal power supply and a blue power-indicator LED. The S6 studio monitor has a balanced XLR and a 1/4″ TRS line-level input with an A-taper level control.

Coaxial systems, such as the S6, have both drivers on the same axis— providing a single point source for a consistent acoustic center. This results in symmetry of response on both the horizontal and vertical axes, at any given angle. The crossover transition is, therefore, seamless at all angles.

Onboard TQ Temporal Equalization by Fulcrum Acoustics
Each Sceptre monitor contains a 32-bit/96kHz, dual-core, active floating-point DSP chip that powers Fulcrum Acoustic’s TQ algorithms. The TQ algorithms use fully addressable Finite Impulse Response (FIR) filters to eliminate horn reflections and to correct linear time and amplitude anomalies. Loudspeakers tuned with TQ provide a crisper stereo image, greater soundstage depth, more separation between the elements of a complex mix, increased resistance to feedback, more seamless transitions between distributed loudspeakers, and a less fatiguing listening experience.
Acoustic Space Control
The Acoustic Space Control is a second-order shelving filter centered at 100Hz. It can remain flat or attenuate by 1.5dB, 3dB, or 6dB— reducing the boundary bass boost that occurs when the monitor is placed near a wall or corner.
Acoustic Tuning Controls
The High-Frequency Driver Adjust switch can boost the tweeter by 1dB, or cut by 1.5dB or 4dB. The High-Pass switch rolls off the lows below a specified frequency, 60, 80, or 100Hz, at a slope of 12dB/octave. This control is important if you are using a subwoofer in conjunction with the Sceptre.
Input Sensitivity Control
A sensitivity control ranging from +4dBu to -10dBV helps you match the Sceptre to your mixer’s outputs.
Thorough Protection Circuitry
RF shielding protects against radio frequencies that could be introduced to the signal and become audible. Sceptre monitors also provide overheat protection, current-output limiting and subsonic protection. “Soft startup” amplifiers prevent damaging pops from sounding through the speakers when you power them up
SPECS

PreSonus S6 Specs Inputs 1 x XLR balanced 1 x 1/4" TRS balanced Frequency Response Not specified by manufacturer Crossover Frequency Not specified by manufacturer LF Amplifier 100W, Class D HF Amplifier 100W, Class D Maximum SPL 102 dB, continuous Low Frequency Driver 6.5" (16.51 cm) High Frequency Driver 1" (2.54 cm) Volume Control A-type taper DSP 32-bit / 96 kHz, dual-core, active floating-point DSP Equalization HF Control: +1 dB, flat, -1.5 dB, -4 dB; switchable Low Cut Filter: Flat, 60 Hz, 80 Hz, 100 Hz; switchable Acoustic Space Control: Flat, -1.5 dB, -3 dB, -6 dB; switchable Protection RF interference Output-current limiting Over-temperature Turn-on/off transient External mains fuse Dimensions (W x D x H) Not specified by manufacturer Weight Not specified by manufacturer Packaging Info Package Weight 22.35 lb Box Dimensions (LxWxH) 15.7 x 15.2 x 10.4"
In the Box

PreSonus Sceptre S6 Two-Way CoActual Studio Monitor with DSP Temporal Equalization (Each) Power Cable Limited 1-Year Warranty
Show Certificate
  • For further information on the nature of the review controls, as well as the possibility of contacting the author of the review please consult our  GCU.
  • No inducements have been provided for these reviews.
  • Reviews are published and kept for a period of five years.
  • Reviews can not be modified: If a customer wishes to modify their review then they can do so by contacting Verified Reviews directly to remove the existing review and publish an amended one .
  • The reasons for deletion of reviews are available here.

5 /5

Based on 1  customer(s) reviews

  • 1
    0
  • 2
    0
  • 3
    0
  • 4
    0
  • 5
    1
Sort the reviews display :
×

Anonymous A. published 03/02/2021 following an order made on 01/01/2021

5/5

Didn’t get them.

Was this review helpful ?Yes0 No0