Miami's #1 Source for Pro Audio & DJ Equipment: 1-866-279-4489 / 305-420-5634

RME Babyface Pro FS – Presonus Eris3.5 – ATHM20X – (2) XLR Cables

Item #: 725330078993

Add to Wishlist

-4 RME Babyface Pro FS - Presonus Eris3.5 - ATHM20X - (2) XLR Cables - $919.99

IN STOCK & READY TO SHIP

Sale Price:
USD 1019.99
+ Plus Free Shipping

In stock

-Financing Available Here-
FINANCING AVAILABLE / CLICK HERE
 
FINANCING AVAILABLE / CLICK HERE
 
+ Add to Wish List
More Financing
  • Regular Price
    $1019.99
  • Instant Savings
    $0

DEALS?

Don't see the deal you need

Request a Deal

We Price Match any price from an Authrized Dealer.

You will receive a quick response from our crew.

Or just call us now

(866) 279-4489

CAPTCHA
Please wait...

QUESTIONS?

Connect with an expert instantly.

Call us: 866-279-4489


Free Shipping

Easy Returns
People Who Viewed This Item Also Viewed
Overview

The RME Babyface Pro FS 24-Channel 192 kHz USB 2.0 Bus-Powered Audio Interface is designed for a wide variety of studio and live recording applications. Users of the original Babyface Pro will recognize the look of this portable interface, with its dedicated XLR sockets and parallel phone jacks (1/4″, 3.5mm, and TRS connections).

Familiar users will be delighted at the new improvements offered in the Babyface Pro FS. RME has implemented a +19/+4 dBu switch on the bottom to reduce the output level, allowing you to optimize the signal-to-noise ratio of the preamps on a case by case basis. The clocking, already high-quality, has been improved to provide ultralow jitter and jitter immunity. The 3.5mm headphone output power has risen from 70 to 90mW, and both headphone outputs sport improved THD up to 10 dB. Latency now has a typical delay of 5 samples AD and 7 samples DA, one-fifth of previous generations. These are just some of the improvements.

The interface ships with the company’s TotalMix FX, a software mixer available for Windows, Mac OS X, and iOS. When using the device with an iPad, an external power adapter must be used, as the iPad alone is unable to power the interface. The mixer software allows you to use the interface in a wide variety of situations, from the simple mixing of signals to more complicated routing configurations.

The unit’s FPGA-based DSP mixer adds a flexible 3-band parametric equalizer on all inputs and outputs. Delay and reverb are also on hand. Achieving sample rates and resolutions of up to 192 kHz / 24-bit, the interface offers a professional recording solution in a compact form factor.

New Features over Previous Babyface Pro

  • +19/+4 dBu switch on the bottom adds a direct way to reduce the output level, improving SNR for sensitive active monitors, as well as avoiding distortion/overloads, and keeping TotalMix FX faders near 0 dB instead of high attenuations
  • Full SteadyClock FS circuit for ultralow jitter and high jitter immunity
  • 3.5 mm TRS phones output power rises from 70 mW to 90 mW
  • THD of both phones outputs improved by up to 10 dB
  • Uses same output opamps as ADI-2 Pro
  • Output impedance of 3.5 mm TRS lowered from 2 to 0.1 ohm
  • Mic inputs SNR improved from 112.2 to 113.7 dB
  • TRS line inputs SNR improved from 114 to 116 dB RMS (120 dBA)
  • THD line inputs improved by 8 dB
  • Latency improved by six samples on the AD side by new ADC (5 samples AD, 7 samples DA)
  • No increase in power consumption, despite new features
  • K-slot for theft protection
IN THE BOX

– RME Babyface Pro FS
– Presonus Eris3.5
– ATHM20X
– (2) XLR Cables
Specs

Interface
Channels of I/O Analog:
4 Inputs / 4 Outputs
Digital:
12 Inputs / 12 Outputs
Max Sample Rate/Resolution 192 kHz / 24-Bit
Connectivity
Host Connection 1 x USB Type-B (USB 3.0)
Analog I/O 2 x XLR Balanced Mic/Line Input
2 x 1/4" Balanced/Unbalanced Line/Hi-Z Input
2 x XLR Balanced Monitor Output
1 x 1/4" TRS Unbalanced Headphone Output
1 x 1/8" / 3.5 mm TRS Unbalanced Headphone Output
Phantom Power +48 V
Digital I/O 2 x TOSLINK / ADAT, S/PDIF (I/O) In/Out
MIDI I/O 1 x 5-Pin MIDI In (On Breakout Cable)
1 x 5-Pin MIDI Out (On Breakout Cable)
Performance
Frequency Response A/D Converters, Mic/Line Inputs:
18 Hz to 20.8 kHz -0.1 dB (at 44.1 kHz)
A/D Converters, Mic/Line Inputs:
7 Hz to 45.8 kHz -0.5 dB (at 96 kHz)
A/D Converters, Mic/Line Inputs:
5 Hz to 88 kHz (at 192 kHz)
A/D Converters, Line/Hi-Z Inputs:
5 kHz to 20.8 kHz -0.1 dB (at 44.1 kHz)
3 Hz to 45.8 kHz -0.5 dB (at 96 kHz)
2 Hz to 92 kHz -1 dB (at 192 kHz)
D/A Converters, Line Outputs:
0 Hz to 20.8 kHz -0.5 dB (at 44.1 kHz)
0 Hz to 45 kHz -0.5 dB (at 96 kHz)
0 Hz to 89 kHz -1 dB (at 192 kHz)
Gain Range Mic/Line/Hi-Z Inputs:
-11 dB Up to +65 dB
Max Input Level Mic Inputs:
+8 dBu (Min Gain)
+19 dBu (Pad On)
-57 dBu (Max Gain)
-46 dBu (Pad On)
Line/Hi-Z Inputs:
+13 dBu (+4 dBu)
-5 dBu (-10 dBV)
Headphone Output Power 60 mW into 10 Ohms (Max)
90 mW into 1000 Kilohms (Max)
Dynamic Range D/A Converters:
115 dB RMS
118 dBA
Impedance Mic/Line Inputs:
2 to 5.2 Kilohms (Balanced)
1 to 2.6 Kilohms (Unbalanced)
Line/Hi-Z Inputs:
1 Megohm
Line Outputs:
300 Ohms (Balanced)
150 Ohms (Unbalanced)
Headphone Outputs:
10 Ohms (Unbalanced)
0.1 Ohm (Unbalanced)
THD+N Mic/Line Inputs:
< -108 dB (< 0.00035%)
< -100 dB (< 0.001%)
Line Outputs:
-102 dB (0.0008%)
THD Line Outputs:
-106 dB (0.0005%)
Mic/Line Inputs:
-112 dB (24%)
-115 dB (16%)
SNR Mic/Line Inputs:
113.7 dB RMS
117 dBA
Line/Hi-Z Inputs:
116 dB RMS
120 dBA
Line Outputs:
114.8 dB RMS
118 dBA
Channel Separation Mic/Line Inputs:
>110 dB
Line Outputs:
>110 dB